When it comes to industrial microwave power, Ferrite Microwave Technologies (FMT) delivers with the GET 2024 75 kW microwave transmitter. Around the world, thousands of these transmitters are used every day for tempering, drying, heating, plasma, food, sintering, and other industrial applications. This transmitter provides the lowest cost per watt of microwave power generation and has been an industry standard for over a decade.
A Powerful 75 kW Transmitter
What makes this 75 kW extremely popular is the durable design, reliability, safety features, and cooking and tempering performance. It is the basic building block for all of FMT’s industrial microwave equipment, which operates at either 929, 915 or 896 MHz.
The GET 2024 can be used as a single self-contained microwave power unit to provide power in the 5 kilowatt to 100 kilowatt range. It can also be used in combination with other FMT transmitters to provide boosting, cooking, and tempering power up to 750 kilowatts. GET 2024 transmitters are fully compatible with other FMT industrial microwave equipment.
Advanced Microwave Technology
The power for FMT industrial microwave ovens is supplied by the GET 2024 transmitter, which incorporates the latest in electronic and microwave technology. It is a proven, rugged, and dependable transmitter that provides reliable and safe operation in all kinds of applications. Transmitter control is based on use of a local or remote, via block I/O, Allen-Bradley PLC. Precise control of filament amps based on microwave power ensures maximum tube life based on tube manufacturers amperage recommendations.
Microwave Isolation
Each GET 2024 transmitter is electrically isolated from the process oven by an integral microwave circulator that helps provide long magnetron tube life. The 75 kw microwave transmitter can be located directly adjacent to, above, or below an applicator cavity. Because of the efficiency of FMT’s waveguide power transmission, it is possible to install the transmitter in a remote location.
75 kW Microwave Transmitter | GET 2024: Highlights
- Permits fast warm-up and low operating cost to save time, energy, and money
- Delivers a powerful 260,000 BTUs per hour to cook or temper meat, fish, poultry, fruit, or bakery items—or for more materials processing
- Provides between 5 kW and 100 kW of power to meet a variety of needs
- Delivers computer controlled precision through an Allen-Bradley Programming Logic Controller (PLC) processor
- Offers increased safety through interlocked access door, and circuit breaker protection for all circuitry
- FMT’s system permits management to monitor oven and transmitter parameters from a remote PC
- Includes a high power circulator that protects the magnetron and includes a sensor to measure reflected power
75 kW Transmitter: FAQs
To help you better understand our 75 kW microwave transmitter (GET 2024), we’ve compiled answers to some frequently asked questions. The team at FMT is always on standby to answer any additional questions you may have.
Are microwave transmitters safe?
Yes. Interlocking access doors on transmitters meet all applicable government (OSHA and Health & Human Services) safety standards. FMT trasmitters provide the safest operating environment available.
Where are the controls found?
All controls for typical transmitter operation are found on the front of the enclosure, though remote control panel operation is possible. This ensures consistent, uniform, and efficient operation.
Does it need a water hookup or cooling system?
Yes. FMT microwave transmitters are water cooled through a heat exchanger using city or local water supply. The system includes a one-inch inflow and outflow pipe. Flow rates depend on the temperature of water entering the heat exchanger.
Is there any radio frequency interference?
The FMT GET 2024 meets all applicable Federal Communication Commision Standards for electromagnetic interference, as well as Worldwide Standards for Safety. Check out this data sheet for more!
Microwave Transmitter: Specifications
The following specifications apply to Ferrite Microwave Technologies GET 2024 75 kW microwave transmitter:
| Specifications: |
|---|
| 75 kW |
| 915 or 896 MHz |
| 0.9 power factor |
| 3 to 20 gallons per minute cooling water (11 to 76 liters per minute) |
| Magnetron microwave power source |
| Input Load: 480 volts, 3 phase, 60 cycle |
|---|
| 40 kW – 80 amps |
| 50 kW – 100 amps |
| 60 kW – 125 amps |
| 75 kW – 135 amps |
| KVA Requirement |
|---|
| 40 kW – 60 KVA |
| 50 kW – 71 KVA |
| 60 kW – 86 KVA |
| 65 kW – 94 KVA |
| 75 kW – 103 KVA |
To learn more about Ferrite Microwave Technologies 75 kW Transmitters (GET 2024), please contact our support team.
